885nm-120W
Industrial and research-grade semiconductor lasers feature a wide range of application scenarios. They can serve as pump sources for fiber lasers, solid-state lasers and ultrafast lasers. Meanwhile, they underpin cutting-edge research and high-end manufacturing sectors including nonlinear optics, quantum science, advanced semiconductor manufacturing processes and precision laser metrology, facilitating technological iteration and commercialization of the laser industry.This series of semiconductor lasers boasts core advantages such as high power-to-mass ratio, high electro-optical conversion efficiency and a wide wavelength-locking range. They help customers reduce system power consumption, simplify thermal management solutions and adapt to complex and variable operating conditions, enabling end systems to achieve high integration, robust environmental adaptability and superior performance metrics.
Main features：
wavelength
885±1nm
output power
120W
fiber core diameter
200µm
Optical fiber numerical aperture
0.22 NA
Application：
Performance Parameter
Structure Size (mm)
Instructions for use
-Avoid eye and skin exposure to direct radiation during operation.
-ESD precautions must be taken during storage, transportation and operation.
-Short-circuit is required between pins during storage and transportation.
-Please connect pins to wires by solder instead of using socket when operation current is higher than 6A. Soldering point should be close to the middle of the pins. Soldering temperature should be lower than 260℃ and time shorter than 10 second.
-Make sure the fiber output end is properly cleaned before operation of laser. Follow safety protocols to avoid injury when handling and cutting the fiber.
-Use constant current power supply to avoid surge current during operation.
-Laser diode must be used according to the specifications.
-Laser diode must work with good cooling.
-Operation temperature ranges from 23℃ to 27℃ .
-Storage temperature ranges from -20℃ to +70℃.
-ESD precautions must be taken during storage, transportation and operation.
-Short-circuit is required between pins during storage and transportation.
-Please connect pins to wires by solder instead of using socket when operation current is higher than 6A. Soldering point should be close to the middle of the pins. Soldering temperature should be lower than 260℃ and time shorter than 10 second.
-Make sure the fiber output end is properly cleaned before operation of laser. Follow safety protocols to avoid injury when handling and cutting the fiber.
-Use constant current power supply to avoid surge current during operation.
-Laser diode must be used according to the specifications.
-Laser diode must work with good cooling.
-Operation temperature ranges from 23℃ to 27℃ .
-Storage temperature ranges from -20℃ to +70℃.
