405nm-160mW
405nm semiconductor laser is specially developed for printing purple laser digital plate making, matching the spectral response of photopolymerized purple sensitive plate materials, and completing graphic and text exposure imaging through photochemical reactions. With the advantage of short wavelength, high imaging resolution, controllable dot expansion, suitable for fine graphic and high network cable plate making; Low exposure energy requirements, fast scanning speed, and cost friendly whole machine matching. Laser has excellent beam quality, high-speed modulation performance, and long-term stability. It supports multi-channel array solutions and is suitable for purple laser plate making machines such as printing and dyeing, commercial printing, and packaging. It is the mainstream UV-CTP light source solution.Main features：
wavelength
405nm
output power
160mW
Optical fiber numerical aperture
0.22 NA
fiber core diameter
40μm
Application：
Performance Parameter
Structure Size (mm)
Instructions for use
-Avoid eye and skin exposure to direct radiation during operation.
-ESD precautions must be taken during storage, transportation and operation.
-Short-circuit is required between pins during storage and transportation.
-Please connect pins to wires by solder instead of using socket when operation current is higher than 6A. Soldering point should be close to the middle of the pins. Soldering temperature should be lower than 260℃ and time shorter than 10 second.
-Make sure the fiber output end is properly cleaned before operation of laser. Follow safety protocols to avoid injury when handling and cutting the fiber.
-Use constant current power supply to avoid surge current during operation.
-Laser diode must be used according to the specifications.
-Laser diode must work with good cooling.
-Operation temperature ranges from 15℃ to 35℃ .
-Storage temperature ranges from -20℃ to +70℃.
-ESD precautions must be taken during storage, transportation and operation.
-Short-circuit is required between pins during storage and transportation.
-Please connect pins to wires by solder instead of using socket when operation current is higher than 6A. Soldering point should be close to the middle of the pins. Soldering temperature should be lower than 260℃ and time shorter than 10 second.
-Make sure the fiber output end is properly cleaned before operation of laser. Follow safety protocols to avoid injury when handling and cutting the fiber.
-Use constant current power supply to avoid surge current during operation.
-Laser diode must be used according to the specifications.
-Laser diode must work with good cooling.
-Operation temperature ranges from 15℃ to 35℃ .
-Storage temperature ranges from -20℃ to +70℃.
